Klenk Aviation Snips, HVAC Tools, Metal Roofing Tools
Klenk logo

Premium Snips and Tools Since 1934
Distributor Login
Where To Buy


Product Menu


  • MADE IN USA TOOLS   MADE IN USA

    NEED A SPRING?SNIPS
    COMPARISON
    CHART

    NEED A SPRING?NEED A SPRING
    FOR YOUR
    AVIATION SNIP?

    Translate Page

    Select Language Below

    Bookmark and Share

      Klenk® Aviation Snips
    --> -->

    HVACR / SHEET METAL

    STAINLESS STEEL / ARCHITECTURAL METAL / SIDING


    Klenk® 10½" Aviation Snips

    BROCHURE
    Get Adobe Reader

    DURABILITY:
    Hardened alloy steel blades resist wear and breakage.
    Hardened pivot bolt provides durability.

    EASIER CUTTING:
    Double-cam-action provides greater cutting power.
    Serrated blades draw work into cutting edge without slipping for accurate, clean cuts.
    Self-locking nuts allow easy adjustment.

    COMFORT:
    Maximum jaw opening provides longer cuts -- minimal handle opening is easier on your hand, and cuts quick and easy.

    Klenk® Serrationless Aviation Snips --
    Smooth blades leave no teeth marks in architectural metal!

     

    MA70560 Aviation Snip

    left/straightModel # MA70560
    Klenk Aviation Snips, WITH BUILT-IN WIRE CUTTER
    LEFT/STRAIGHT CUT, parallel handle

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    LEFT
    0.960

    BUY ONLINE

    MA70570 Aviation Snip

    left/straightModel # MA70570
    Klenk Aviation Snips, WITH BUILT-IN WIRE CUTTER
    RIGHT/STRAIGHT CUT, parallel handle

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    RIGHT
    0.960

    BUY ONLINE

    MA70580 Aviation Snip

    left/straightModel # MA70580
    Klenk Aviation Snips, WITH BUILT-IN WIRE CUTTERSTRAIGHT CUT/SLIGHT CURVES, parallel handle

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    STRAIGHT
    0.960

    BUY ONLINE

    MA70530 Aviation Snip

    left/straightModel # MA70530
    Klenk Aviation Snips
    LEFT/STRAIGHT CUT, original handle w/spur

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    LEFT
    0.880

    BUY ONLINE

    MA70540 Aviation Snip

    left/straightModel # MA70540
    Klenk Aviation Snips
    RIGHT/STRAIGHT CUT, original handle w/spur

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    RIGHT
    0.880

    BUY ONLINE

    MA70550 Aviation Snip

    left/straightModel # MA70580
    Klenk Aviation Snips
    STRAIGHT CUT/SLIGHT CURVES, original handle w/spur

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    STRAIGHT
    0.880

    BUY ONLINE


    TOP OF PAGEKlenk® 9½" Aviation Snips

    MA70030

    DURABILITY:
    Hardened alloy steel blades resist wear and breakage.
    Hardened pivot bolt provides durability.

    EASIER CUTTING:
    Double-cam-action provides greater cutting power.
    Serrated blades draw work into cutting edge without slipping for accurate, clean cuts.

    Self-locking nuts allow easy adjustment.

    COMFORT:
    Maximum jaw opening provides longer cuts -- minimal handle opening is easier on your hand, and cuts quick and easy

     

    MA70030 Aviation Snip

    left/straightModel # MA70030
    Klenk Aviation Snips
    LEFT/STRAIGHT CUT, parallel handle

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    9-1/2"
    1-1/4"
    LEFT
    0.840

    BUY ONLINE

    MA70040 Aviation Snip

    left/straightModel # MA70040
    Klenk Aviation Snips
    RIGHT/STRAIGHT CUT, parallel handle

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    9-1/2"
    1-1/4"
    RIGHT
    0.840

    BUY ONLINE

    MA70050 Aviation Snip

    left/straightModel # MA7050
    Klenk Aviation Snips
    STRAIGHT CUT/SLIGHT CURVES, parallel handle

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    9-1/2"
    1-1/4"
    STRAIGHT
    0.840

    BUY ONLINE


    TOP OF PAGEKlenk® Offset Snips

    The most DURABLE snip is now the most COMFORTABLE!

    MA75200 Offset Snips - Benefits

    • New shorter handles with softer grip on upper handle gives you ergonomic comfort, reducing hand fatigue.
    • Thicker alloy steel blades increase strength and add durability.
    • Unique flat blade design makes this the easiest turning snip available.
    • Improved forming process produces stress-free blades that resist breakage.
    • Improved heat-treating process produces blades that are tougher and more wear-resistant.
    • Precision-ground tips meet together evenly to prevent fishhooks, burrs, and tearing at the end of each cut.

    Cutting capacity: 18 ga. CR - 22 ga. SS (not recommended for use on seams).

     
    MA75200 Klenk Offset Snip

    left/straightModel # MA75200
    Klenk Offset Aviation Snips
    LEFT/STRAIGHT CUT

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-3/8"
    LEFT
    1.060

    BUY ONLINE

    MA75210 Klenk Offset Snip

    left/straightModel # MA75210
    Klenk Offset Aviation Snips
    RIGHT/STRAIGHT CUT

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-3/8"
    RIGHT
    1.060

    BUY ONLINE


    TOP OF PAGE
    MA74500 in actionKlenk® Bulldog Snips
    • Smooth orange grips and long leverage
    • Hardened blades and bolt
    • Short bite, serrated blades, for heavier gauge metal
    • Ergonomic handle, comfortable design
    • Ideal or ‘S’ slips and drives
    • Works well on T-bar used in drop ceilings and the extruded aluminum used in doors and window frames

    NOTE: Cutting capacity: 16 ga. CR - 18 ga. SS.

    MA74500 Bulldog Snip

    Model # MA74500
    Klenk Bulldog Snips

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    9"
    3/4"
    STRAIGHT
    0.760

    BUY ONLINE


    TOP OF PAGE

    Klenk® LONG CUT Aviation Snips for Siding


    Klenk Long Cut Siding Snips

    • Heavy-duty, industrial-quality snips, specially designed for steel, aluminum and vinyl siding work
    • Long alloy steel blades, heat-treated for hardness
    • Serrated blades draw work into cutting edge without slipping for accurate, clean cuts.
    • Longer leverage, spring action handles
    • Fine points for cutting in close to siding locks and rolled edges
    • Cutting capacity: 18 ga. CR - 22 ga. SS
     
    MA72000 Siding Snips

    Model # MA72000
    Large Siding Snip

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    13"
    2-1/4"
    STRAIGHT
    1.380

    BUY ONLINE

    MA72010 Siding Snips

    Model # MA72010
    Small Siding Snip

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    STRAIGHT
    0.920

    CALL 1-800-327-5619 FOR YOUR NEAREST DISTRIBUTOR OR TO ORDER

    MM20200 Sheath

    Model # MM20200
    Siding Snip Sheath

    Fits Length
    Weight (lbs)
    10-1/2" and 13" siding snips
    0.180

    BUY ONLINE


    TOP OF PAGE
    BROCHURE
    Get Adobe Reader

    Klenk® Copper Cutting Aviation Snips
    An essential tool for COPPER, ZINC, and other architectural metals!

    • Get the extra leverage and cutting power of a compound-action aviation snip with the smooth cut of a traditional pattern snip
    • Klenk’s new smooth, non-serrated blade leaves no teeth marks in the metal.
    • Now available in right-cut, left-cut, and straight-cut models!

    • Perfect for architectural metals -- COPPER, BRASS, ZINC, and pre-coated metals -- where a smooth cut edge is needed.
    • Recommended for zinc metals, used extensively in the building industry in roofing, flashing and weatherproofing applications.
     
    MA74520

    left/straightModel # MA74520
    Klenk Copper-cutting Aviation Snips
    LEFT/STRAIGHT CUT

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    LEFT
    0.960

    CALL 1-800-327-5619 FOR YOUR NEAREST DISTRIBUTOR OR TO ORDER

    MA74530

    left/straightModel # MA74530
    Klenk Copper-cutting Aviation Snips
    RIGHT/STRAIGHT CUT

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    RIGHT
    0.960

    CALL 1-800-327-5619 FOR YOUR NEAREST DISTRIBUTOR OR TO ORDER

    MA74510

    left/straightModel # MA74510
    Klenk Copper-cutting Aviation Snips
    STRAIGHT CUT/SLIGHT CURVES

    Length
    Cut Length
    Cut Direction
    Weight (lbs)
    10-1/2"
    1-1/2"
    STRAIGHT
    0.960

    CALL 1-800-327-5619 FOR YOUR NEAREST DISTRIBUTOR OR TO ORDER

     
    TOP OF PAGE

    Klenk Address
    e-mail: Sales@KlenkTools.com

    Copyright © 2000-2014. This site is protected by copyright and trademark laws under United States and international law.
    All rights reserved.

    About Klenk | Terms and Warranty | Terms of Use | Privacy Policy