Aviation Snips

• DURABILITY:
  Hardened alloy steel blades resist wear and breakage.
  Hardened pivot bolt provides durability.
• EASIER CUTTING:
  Double-cam-action provides greater cutting power.
  Serrated blades draw work into cutting edge without slipping for accurate, clean cuts.
  Self-locking nuts allow easy adjustment.
• COMFORT:
  Maximum jaw opening provides longer cuts -- minimal handle opening is easier on your hand, and cuts quick and easy.

Fairmont Tongs

• Fairmont's forged hand seamers are powerful and versatile additions to your tool box.
• Used in HVACR, metal roofing, and many other sheet metal applications.
• Forged and plated -- and fully guaranteed against manufacturing defects.
• Bending depth marks on tong jaws.
• Regular or offset handle models.
• Also available with cushion grip handles, which provide a softer, more comfortable grip.
• Tongs are 9-1/2" long, with a 3" wide by 1-1/8" deep jaw.

Crimpers

• Redesigned -- now available in straight and ergonomic, angled, offset models
• Ideal for reducing diameter of round duct, sheet metal pipe, and downspouts for insertion into other pipes
• Five blades make uniform crimps on sheet metal up to 20 gauge.
• Recommended for light or heavy piping -- furnace, smoke, wall stacks, air ducts, water heater vent pipes, and downspouts
• Crimps up to 1-5/8" back from end for good overlap connection
• Heat treated blades for longer wear, hardened pivot bolt for durability, and vinyl grips for comfort
• For natural indraw on metal, always start with the three blades on top.

Pipecutter

• Start cut by pushing center blade point through pipe.
• Three-blade tool takes out a 1/8" track leaving both ends clean and straight.
• Maximum opening of jaws provides better bite.
• Minimum opening of spring-back handles provides easier cutting.
• Tool made of the finest hardened steel.
• Vinyl handles provide comfortable grip.
• Hardened pivot bolt provides long wear.

Notcher

• Drop forged jaw
• Compound leverage handles
• Notches cleanly without slipping
• Orange vinyl grips
• Cutting capacity of up to 22 gauge CR

Aluminum Folding Tools

• Makes clean folds in 24 gauge sheet metal easily!
• Made of extruded aluminum, folding tools are less than half the weight of similar steel tools, but just as strong.
• Available in 12", 18", and 24" lengths.
• All models fold 3/8" and 1" depths.
• One-piece aluminum tool
  ► No spotwelds to break loose
• Ergonomic shape and finger ridges
  ► Better grip for easier folding
• Sight holes
  ► Guides for proper depth alignment

Combo Drive Tool

• Get four tools in one
  ► Avoid carrying unnecessary tools.
  • Duct Puller makes joining duct ends together easier so drives can be inserted.
  • Folding Tool is invaluable for making quick easy 3/8" folds.
  • Scribe function lets you make accurate circles and straight lines without searching for another straightedge or template.
  • Ruler helps you make quick measurements -- 10" long with engraved 1/4" markings.
• Weighs just over 1/2 pound
  ► Easily portable, won't weigh you down.

PTFE-Coated Shear

• Non-stick coating: Cuts through sticky materials with less gumming up than standard shears. Easily cleaned with mineral spirits.
• Serrated bottom blade cutting edge: Helps to hold material in place to prevent material from moving or folding over during cutting.
• Hot-forged, through-hardened carbon steel: Provides durability, stays sharper longer.
• Shears are 10" bent trimmers: Offset shape helps to get blades in tight areas to cut tape, and 10" blades help to cut tape in a single cut.
• Large, comfortable handles: Fits all hand sizes.

Industrial Shears

• Hot forged with chrome over nickel plating
• Larger model has extended bottom ring handle, which adds comfort and cutting leverage.
• Cuts easily through fiberglass duct wrap, duct tape, and other materials.
• Sold in packs of 6

Ductboard Knives

• Heavy gauge blades are made from high carbon steel.
• Blades are hardened, ground, and honed to an extra sharp edge and cut cleanly through ductboard.
• Knives are available in two blade sizes.
• Available with or without the safety guard, which increases safety and also acts as a finger stop for cutting with increased pressure.
• Four- and six-inch blades available.

STAK-N-TOTES®
A convenient way to store your fittings, tools, and small parts!

• ORGANIZE EVERYTHING! -- Our patented STAK-N-TOTE® -- with five different compartment layouts -- are ideal for organizing, storing and transporting small parts, fittings, screws, nuts, bolts, tools, and more while at the same time taking up less space in your warehouse, truck, or shop.
• LOCATE - ACCESS - TRANSPORT ---- FAST! -- See all your parts at a glance without unstacking -- with each tote's angled sides allowing you to see and access all your stored items. And each tote has a built-in handle, which provides easy lifting, stacking, and unstacking on the job site.
• DURABLE! -- Premium-grade galvanized steel is strong, sturdy, and corrosion-resistant -- and outlasts plastic trays.

Laminate Shears

Klenk Laminate Shears™ cut high-pressure laminates such as Wilsonart® and Formica® without chipping or binding. These tools do not cut steel. They are designed for the kitchen and bath, or cabinet and countertop trade. They will not mar the surface of the laminate.

• Straight Cut Laminate Shear (K12)
• Universal Plastic Laminate Nibbling Shear (K14)
• Original Model Laminate Shear (KDC5L)